Untitled Document
Untitled Document
> Archives > Current Issues
JEET, Vol. 13, No. 2, March 2018
IPMSM Design for Sensorless Control Considering Magnetic Neutral Point Shift According to Magnetic Saturation
Ju Lee
Area B - Electric Machinery and Power Electronics
Abstract In this paper, interior permanent magnet synchronous motor (IPMSM) design for sensorless drive, considering magnetic neutral point shift according to magnetic saturation, has been proposed. Sensorless control was divided into a method based on inductance and a method based on back induced voltage. Because induced voltage is very small at zero or low speed, error in rotor initial position estimation may occur. Using the ratio of saliency addresses this problem. When using high-frequency injections at low speed, the rotors initial position is estimated at the smallest portion of the inductance. IPMSM has the minimum inductance at the d-axis. However, if magnetic saturation leads to magnetic neutral point variation, following the load current change, there is a change in the minimum point of inductance. In this case, it can lead to failure of initial rotor position estimation. As a result, it is essential that the blocking design has an inductance minimum point shift. As such, in this study, an IPMSM design method, by blocking magnetic neutral point change, has been proposed. After determining the inductance profile based on the finite element analysis (FEA), the results of proposed method were verified.
Keyword Inductance profile,IPMSM design method,Loading distribution method,Magnetic saturation,Saliency,Sensorless control
PDF
Untitled Document