Untitled Document
Untitled Document
> Archives > Current Issues
JEET, Vol. 13, No. 2, March 2018
A Practical Voltage Error Correction Technique for Distribution System under Distribution Automation Environment
Seung-Jae Lee
Area A - Electric Power Engineering
Abstract Transmission system has been well studied since long time and power system techniques of distribution system are more or less derived from transmission system. However, unlike transmission systems, many practical issues are encountered in the distribution system. Considerable amount of error is observed in voltage obtained from the Feeder Remote Terminal Units (FRTUs) measured by the pole mounted PTs along the distribution feeder. Load uncertainty is also an issue in distribution system. Further, penetration of Distributed Generators (DGs) creates voltage variations in the system. Hybrid radial/ loop distribution system also make it complicated to handle distribution system. How these constraints to be handled under Distribution Automation (DAS) environment in order to obtain error free voltage is described in this paper and therefore, a new approach of voltage error correction technique has been proposed. The proposed technique utilizes reliable data from substation and the FRTUs installed in DAS. The proposed technique adopts an iterative process for voltage error correction. It has been tested and proved accurate not only for conventional radial systems but also for loop distribution systems.
Keyword Distribution system,Voltage measurement,Voltage error correction,Distribution automation system,Distributed generations
PDF
Untitled Document